CST/Berger

CST Mini Prism Pole System PN:CST65-1700R

Includes a 25 mm prism and target (red on black) in a 0/-30 mm offset holder with a built in 30 minute circular vial; comes with replaceable points, a 4 section aluminum pole and a padded carrying case.

CST Tribrach With Optical Plummet PN:CST61-4500

Has a locking enforced center knob, 5.8 x 11 inch base, and an 8 minute circular vial; weighs 1.55 lbs (0.70 kg).

CST 5 1/4" Abney Hand Level PN: CST17-640

The CST/Berger 5 1/4" Abney hand level with radius arc graduated from 0 to 90 degrees. Constructed out of brass with a versatile eyepiece draw providing greater accuracy. The convenient design allows for quick field maintenance and repair.

CST Mini Prism PN:CST65-1500

Provides a low cost versatility for shots up to 300 ft (900 m); 0/-30 mm offset on dual sided aluminum tilting target; on board offset circular bubble vial; 5/8 x 11 inch mounting thread; precision prism ground up to 2 arc seconds; 1 year warranty.

CST Single Prism PN:CST63-1010Y

0/-30 mm offset, precision ground to an accuracy of 2.5 seconds (62.5 mm), fully compatible with all the leading manufactures, comes with a locking screw for a tilt setting, has bayonet adapter with 5/8 x 11 inner thread.

CST Maxilite 15FT / 4.6M Prism Pole PN:CST67-4715TMA  

Comes with an adjustable tip with 5/8 x 11 inch adapter for prism mounting, hardened steel point and standard red and white paint, anodized dual graduation marks, weighs 3.8 lbs (1.72 kg), has 4 sections.

CST Maxilite 12FT Prism Pole PN:CST67-4712TMA

Comes with an adjustable tip with 5.8 x 11 inch adapter for prism mounting, anodized dual graduation marks, 3 sections, weighs 3.8 lbs (1.72 kg).

CST Maxilite 2.5M Prism Pole PN:CST67-4708TMA

Created from high grade, lightweight aluminum tubing; 40% lighter than the standard CST prism pole; doubled strength for increased durability.

CST 4.6M/15FT Quick-Lock Prism Pole PN:CST67-4515TMA

Quick lock feature makes it so you never get an inaccurate reading due to your pole slipping, comes with a circular level vial and replaceable hardened steel point, has 10ths and metric (every 2 mm) graduations and adjustable 5/8 x 11 inch mounting stud to suite all commonly used prisms, weighs 2.7 kg (5.6 lbs).

CST 3.6M/12FT Quick-Lok Prism Pole PN:CST67-4512TMA

3 sections; top section is anodized aluminum with permanent 10ths and metric graduations; pole includes circular level vial and a replaceable hardened steel point; weighs 5.0lbs (3.2kg).

CST 2.5M/8FT Quick-Lock Prism Pole PN:CST67-4508TMA

Recessed circular vial for vertical alignment, replaceable steel points, 8' tall (2.5 m), measured in 10's and metric, 1 1/4" diameter pole, weighs 5 lbs (2.3 kg).

CST Topcon Style Adapter PN:CST61-3511TYL

Adapts your tribrach to fit Topcon style mounts.

CST/berger RF25 Laser Distance Measurer PN: CSTRF25

The CST RF25 laser distance measuring tool is made for long distance measuring with a range of up to 250m. Stores up to 30 points for easy recall and a large, illuminated four line display. Comes with a two year warranty.

CST Rod Level PN: CST06-750

The CST rod level quickly and accurately determines if your level rod is perpendicular. Comes with a 30 min vial that is securely mounted in a metal head that adjusts so that you can continuously maintain a true vial. Constructed of heavy duty strong aluminum die casting, painted bright red-orange. Works with all leveling staffs and prism poles.

CST Pro Series Zip Line 30M PVC Coated Fiberglass Tape PN:CST74-Y30M

The increments on this tape are m/cm/2mm/cm; built to not break even if vehicles drive over them, they have accurate, wear-resistant graduations; the non glare PVC coating withstands extreme temperatures, water and chemicals, and it has an open reel constructed of high impact ABS plastic.

CST Pro Series Zip Line 100'/ 30M PVC Coated Fiberglass Tape PN:CST74-Y1001M

Increments are 10ths and metric; tape is built not to break even if vehicles drive over them; they have accurate, wear-resistant graduations; the non glare PVC coating withstands extreme temperatures, water and chemicals.

CST Pro Series Zip Line 50M PVC Coated Fiberglass Tape PN:CST74-Y50M

Increments are in: m, cm, 2mm-meters/cm. The tapes have accurate wear-resistant graduations; non-glare PVC coating that withstands extreme temperatures, water and chemicals; an open reel construction made of high impact ABS plastic.

SECO Mini Instrument Tripod PN:SEC5401-23-BLK

Accommodates 5/8 x 11 inch instruments; features a twist lock and a triangle flat head; telescopic aluminum (round) legs allows for setup to extend 25.5 inches (64.77 cm); weighs 6.70 lbs (3.03 kg).

CST 2.5M Surveying Range Pole PN:CST68-3708

Constructed of high strength aluminum core, with alternating orange and white ABS plastic tubing permanently attached to the aluminum; colors are heavily pigmented and are resistant to fading and weathering under the toughest conditions.

CST/Berger Plumb Bob PN:CST11-552

Includes a hardened steel point with ASA thread; steel ASA screw cap allows for storage of extra point and allows for use with common gammon reel or string line reels.

CST Pro Series Zip Line 300'/90m PVC Fiberglass Tape PN:CST74-Y3008M

Increments are 8ths/metric. Has accurate wear-resistant graduations; the non glare PVC coating withstands extreme temperatures, water and chemicals; has also an open reel construction made of high impact ABS plastic.

CST Pro Series Zip Line 300'/90M PVC Coated Fiberglass Tape PN:CST74-Y3001M

Increments are 10ths/metric. Has accurate wear-resistant graduations; the non-glare PVC coating withstands extreme temperatures, water and chemicals; has also an open reel construction made of high impact ABS plastic.

CST Plumb Bob Sheath PN:CST11-557

Holds 14 oz-18 oz plumb bobs.

CST Pro Nylon-Clad Steel 30m Tape PN:CST82-30MB

Comes in increments of meters/cm/mm-m/5mm. Has: accurate wear resistant graduations; flexible high tempered tape core; nylon coating that withstands extreme temperatures, water and chemicals; crank handle that folds flat to prevent breakage.

CST Pro Nylon-Clad Steel Tape 50M Loop End PN:CST82-50MA

Comes in increments of m/cm/mm-m/cm/5 mm. Has: accurate wear resistant graduations and a flexible high tempered tape core; nylon coating that withstands extreme temperatures, water and chemicals; crank handle that folds flat to prevent breakage; a loop end--convenient if you want to hook it on to a marker.

CST Pro Nylon-Clad Steel Tape 300' Loop End PN:CST82-30080A

Comes in increments of feet/inches and 8ths. Has: accurate wear resistant graduations; flexible high tempered tape core; nylon coating that withstands extreme temperatures, water and chemicals; crank handle that folds flat to prevent breakage; a loop end--convenient if you want to hook it onto a marker.

CST Pro Nylon-Clad Steel Tape 300' Loop End PN:CST82-30010A

Comes in increments of ft/10ths and 100ths. Has: accurate wear resistant graduations and a flexible high tempered tape core; nylon coating that withstands extreme temperatures, water and chemicals; crank handle that folds flat to prevent breakage; a loop end--convenient if you want to hook it onto a marker.

CST Pro Nylon-Clad Steel Tape 100'/30m Loop End PN:CST82-1008MA

Comes in increments of inches and metric. Has: accurate wear resistant graduations; flexible high tempered tape core; nylon coating that withstands extreme temperatures, water and chemicals; crank handle that folds flat to prevent breakage; a loop end--convenient if you want to hook it onto a marker.

CST Pro Nylon-Clad Steel Tape 30M Loop End PN:CST82-30MA

Comes in increments of meters/cm/mm-m/cm/5mm. Has: accurate wear resistant graduations; flexible high tempered tape core; nylon coating that withstands extreme temperatures, water and chemicals; crank handle that folds flat to prevent breakage. Comes with the loop end that makes it convenient to hook onto a marker.